High-Tech Battery Solutions IncAnswer
Jan 04, 2026 - 05:22 PM
You may need the following to change your batteries:
Metric/standard socket set and ratchet
Adjustable wrench
WARNING! Do not lift beyond your physical capability. Ask for assistance when necessary while
disassembling or assembling your scooter.
WARNING! Do not pull on electrical harness wires directly to detach them from the scooter. Always
grasp the connector itself when disconnecting the harness to prevent wire damage.
To change batteries in your scooter:
1. Flip the seat up to access the rear storage compartment. Ensure the seat support rod is engaged
See II. “Your Scooter.”
2. Remove the two bolts from the storage bin. Lift the storage bin out of the rear storage compartment.
See figure 10.
3. Disconnect the battery harness and tie-down strap.
4. Disconnect the black (-) and red (+) battery cables from the battery terminals of each battery.
5. Remove the old batteries.
6. Place the new batteries into the battery wells, beginning with the left battery. Insert the left battery
on the right side, and slide it into the left position. Then, insert the right battery. See figure 10.
7. 8. 9. Connect the red battery cable to the positive (+) battery terminal of each battery.
Connect the black battery cable to the negative (-) battery terminal of each battery.
Connect the battery harnesses and battery tie-down strap.
10. Reposition the terminal boots over the battery terminals.
